 |
|
| Wall Mount Range Hoods |
|
|
|
|
|
|
|
|
| Island Mount Range Hoods |
|
|
|
|
|
|
|
|
 |
Range Hood Installation Guide
    
1. Buttons:
- K1: Light
- K2: Motor speed up / timer up / accumulation timer reset
- K3: Motor speed down / timer down / Timer start
- K4: Power
2. Operation
- Grease filter washing reminder:
- The time showing on LCD screen when the motor is running is the accumulated working time of the motor. After it reaches 30 hours then a reminder icon will be flashing at the right bottom corner, reminding user to wash the filter.
- After washing put the filter back on. At the stand by mode, press K2 for over 3 seconds, the accumulation timer will be reset.
- Motor Speed Adjust:
- Press K4, the motor icon will be flashing. Four buttons will be lighted on. Pressing K3 decreases motor speed and K2 is for increasing.
- Press K4, power off. The motor stops and all four button lights will be off as well.
- The default motor speed is the speed at which the motor was turned off last time.
- Timer
- When the motor is running, pressing K4 for 3 seconds will start the timer function. The timer will turn the power off after the pre-set time is over.
- Under the standby mode, press K3 for 3 seconds, the timer icon will be flashing. Press K3 to reduce time, press K2 to increase time (1-15 mins adjustable)
- Light
- K1 independently controls lights (ON/OFF).
3. Product Cosmetic Quality Requirements
- LCD screen has to be at the same level of the stainless steel surface, common differences allowed: –0.5mm to +1mm
- The button is transparent with scripts on top. The printing should not be washed off by any normal chemical washing material.
- The light colour is blue.
- The buttons are (from left to right): Power (K4), “-“ (K3 ), “+” (K2) and Light (K4).
|
| |
|
| |
| |
|
|
